O2 DSL Router Quick Start Manual

O DSL Router Classic
2
Quick start guide
Overview of the package contents and the necessary installation information
You will require the following components to set up and configure your O
will only work once your telephone line has been activated. Please see your welcome letter for the activation date.
O DSL Router Power supply unit
A B
2
Classic with power cable
1
Ethernet/LAN O DSL Starter CD
E F
2
cable
Tip: You will find English and Turkish versions of the quick start guide as PDF documents
on the O DSL Starter CD in the »Handbücher« folder.
2
Setting up and connecting the O
Please only use your O DSL Router Classic in conjunction with your O
2
1
Connecting the DSL router to the power supply
B
Connect the power cable to the DSL router
power supply unit into a power outlet.
Turn the DSL router on using the ON/OFF switch.
Once the blue LED lamp marked »POWER« is continuously illuminated,
the DSL router is ready for use.
Note: This process may take up to 1 minute.
Tip: When setting up the DSL router, please follow the safety notes
in the manual.
3
Connecting the phone/fax to the DSL router
Please wait until the blue »PHONE 1« and »PHONE 2« LEDs are
permanently illuminated. You can now connect your phone/fax.
Note: This process may take between 3 and 5 minutes.
Your phone/fax is connected directly to the DSL router and not to the
telephone socket.
If your telephone connector cable has a Type 1 plug (see top picture),
connect this plug directly to one of the two DSL router connectors marked
»PHONE 1« or »PHONE 2«.
If your telephone connection cable has a Type 2 plug, please use one of the
adapters supplied D as shown in the adjacent picture.
Tip: Connect the phone to the adapter via socket (F); fax via socket (N).
Your phone/fax is now ready to use.
1 The O DSL Router Classic only works with an O
2
different DSL provider, the integrated calling function will not be available.
DSL Router Classic. Please note that the O
2
DSL cable 2 adaptors for
C D
phone/fax
O DSL manual Welcome letter
G H
2
(received in advance)
DSL Router Classic
2
DSL connection.
2
A
. Then plug the
A
Typ 1
Typ 2
DSL tariff from O Germany. If you want to use it with a
2 2
DSL Router Classic
2
Power outlet
ON/OFF switch
Computer
2
Connecting the DSL router to the telephone socket
Connect the small connector on the DSL cable
on the DSL router. Now insert the other end of the DSL cable into the
telephone outlet, which is labelled with an (F) or a telephone symbol.
B The DSL router will now establish a DSL connection. During this time, the
LEDs marked »DSL« and »INTERNET« will flash in succession.
Once the »DSL« LED is permanently illuminated and the »INTERNET« LED
flashes, the DSL router has successfully established the internet connection.
Note: This process may take up to 3 minutes.
4
Connecting the DSL router to the computer
The DSL router and computer are connected via LAN (with Ethernet cable).
Connect the Ethernet/LAN cable
connections marked 1– 4 on the DSL router. Connect the second yellow
plug on the cable to the network connection port on your computer.
D
B C
RESET
A
E D
Phone/fax (analogue)
C
to the grey DSL connector
E to one of the yellow Ethernet
Telephone outlet
TAE outlet (F)
C
E
Please turn over