Installation - Toshiba DKT2001 Technical Bulletin

DKT2001 Digital Single Line Telephone

Installation

1. Set the DIP switches to match
Figure 9-21.
2. If required to achieve maximum
distance (greater than 1000 ft.),
install a two-pair house cable (or
external power).
Programming
Program 03: Specify Code 61 to
indicate a station line PDKU2.
Program 27: Adjusts initial off-hook
volume level for digital telephone
handsets.
Program 38: Specify Code 21.
Program 39: Specify button 01 as a
[PDN].
Important! Do not program CO lines or
secondary line appearances onto
button 01 or in any other position.
Since the system assigns CO lines
01~17 by default, be sure to
remove any CO line appearances
by programming them as Station Speed Dial buttons (code
If the
Note

 


and
Program 92-5: Initializes initial ringing, speaker, and muted ring volume levels of digital
telephones.
Also, refer to the Numerical Programming Listing in the Strata DK Programming Manual for
other station-related programs.
9-54
All manuals and user guides at all-guides.com

 
 
button is removed, the
button. While on an outside call, the user must press

DTMF tones for the duration of the call.
ON
1 2 3 4
Figure 9-21 DKT2001 Single Line Digital
Telephone Settings


).


key becomes the
Strata DK I&M September 1998
Station Apparatus
ON
1 2 3 4
3482

 


then to activate the