Advertisement
SUN2000 V200R001 Replacement Scenario
Original Model
SUN2000-33KTL
SUN2000-33KTL-E001 6
SUN2000-30KL-A
SUN2000-40KTL
SUN2000-25KTL-US
SUN2000-30KTL-US
1
Removing the Original SUN2000
1. Power off the SUN2000 to be replaced.
2. Open the maintenance compartment door.
4. Remove the AC power cable. The SUN2000-
40KTL is used as an example.
If the AC terminal of the original inverter is a 3-pin terminal, use an M8 torque wrench to
remove the terminal.
If the AC terminal of the original inverter is a 4-pin terminal, use an M6 torque wrench to
remove the terminal.
Number of
Replacement Model
PV Strings
6
SUN2000-30KTL-M3
6
6
SUN2000-36KTL-M3
6
SUN2000-25KTL-NAM3
6
SUN2000-30KTL-NAM3
3. Install the support bar and remove the AC
terminal cover.
5. Remove the DC connectors.
15
Advertisement
