Table of Contents
Advertisement
MENU
> LDMOS Drain Voltage
> Carrier Amp. Current
> Peak Amp. Gate Voltage
> Status HPA1
> Main Menu > Setup > Temperature:
Allows for the seting of the operating temperature of the Powers Amplifiers.
MENU
> PA Temperature Control
> Unit Temp
> Main Menu > Setup > Control Mode:
Set CM9001 operation ("local" or "local / remote"):
To change the settings (setup) via the WEB interface, the CM9001 must be configured in "Local /
Remote".
PARAMETER
Voltage (V)
Current (A)
Voltage (V)
Ok
Failure
---- (absence)
PARAMETER
40.0 to 60.0 °C
Celsius
Fanrenheit
DESCRIPTION
LDMOS Drain Voltage - The values are pre-set at the
factory
Carrier Amp. Current - The values are pre-set at the
factory
Peak Amp. Gate Voltage - The values are pre-set at the
factory
Power Amplifier 1 Status
DESCRIPTION
Set the operating temperature of the Powers Amplifiers
Set the temperature unit
E-Compact MP-BB3 Series
42 | 108
Advertisement
Table of Contents
