Table of Contents
Advertisement
Replacement and Adjustment
5.
Remove the LCD unit [A].
6.
Remove the LCD [A].
•
After replacing the LCD, perform the following checks.
LCD Check
•
TouchPanel Check
•
Perform "TouchPanel Calibration"
•
Calibration"
(MultiTouch
D0CA/D0C9/D0C8/D0CB
(LCD
Check)
(TouchPanel
(TouchPanel
Calibration) of the Self Check function.
8-6
Check)
Calibration) and "MultiTouch
SM
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the IM C300 and is the answer not in the manual?
Questions and answers
comment réinitialiser ricoh im c300 manuellement
To manually reset the Ricoh IM C300, follow these steps:
1. Turn the power ON.
2. Reset the PM counter (refer to the replacement procedure of the PM/Yield parts).
3. Turn the power OFF.
This procedure is typically used when resetting waste toner full or near-full messages.
This answer is automatically generated