Ricoh IM C300 Service Manual page 672

SC8xx: Overall System
No. Type
•
•
•
•
•
•
•
•
•
1.
No. Type
HDD File System Error at Main Power On (HDD error)
SC860-01 D
Failed to mount any of the hard disk partitions.
Power failed while writing files to the hard disk.
The machine shut down while writing files to the hard disk.
Be sure to back up the address book and retrieve the log before formatting the
hard disk.
1.
2.
3.
No. Type
SC860-02 D HDD Label Error at Main Power On (HDD error)
Power failed while writing files to the hard disk.
The machine shut down while writing files to the hard disk.
Be sure to back up the address book and retrieve the log before formatting the
hard disk.
1.
2.
3.
D0CA/D0C9/D0C8/D0CB
Details (Symptom, Possible Cause, Troubleshooting Procedures)
SS_COMMAND_ERROR:/* (-9)Drive not responding to command*/
SS_KERNEL_ERROR:/* (-10)Internal kernel error*/
SS_SIZE_ERROR:/* (-11)Drive size too small*/
SS_NO._PARTITION:/* (-12)The specified partition does not exist*/
SS_NO._FILE:/* (-13)Device file does not exist*/
Attempted to acquire HDD status through the driver but there has been
no response for 30 seconds or more.
Unformatted HDD
Label data corrupted
HDD defective
Format the HDD (SP5-832: HDD formatting).
Error Name/Error Condition/Major Cause/Solution
Turn the main power OFF/ON.
It may take a while to shut down because of the hard disk failure.
Format the HDD (SP5-832: HDD formatting) through SP mode.
If there is a problem with the HDD, it has to be replaced.
Error Name/Error Condition/Major Cause/Solution
Hard disk partition data abnormal.
Turn the main power OFF/ON.
It may take a while to shut down because of the hard disk failure.
Format the HDD (SP5-832: HDD formatting) through SP mode.
If there is a problem with the HDD, it has to be replaced.
6-98 SM