Table of Contents
Advertisement
Available languages
Available languages
PRODUCT FUNCTION
• The cell material, PU/Nylon blend, provides a specialty surface that conforms to the specific shape of the
patient, minimizing soft tissue distortion, reducing bone penetration into muscle fascia, and promoting
improved blow flow compared to traditional surfaces.
.
Warning
For important precautions, see pages three and four
Caution
Do not place the control unit on the floor. Position the power cord to prevent tripping hazards.
1) Remove all existing covers and sheets from mattress on bed.
2) Unpack the Harmony, tri-therapy mattress replacement system and inspect all components for damage.
Do NOT use the system if any component is damaged.
3) Confirm there are no sharp objects in the immediate area which may risk damage to the Mattress.
4) Position the Lateral Rotation Mattress Replacement on
top of bed, printed top cover facing upwards and
air hoses towards the foot end of the bed.
5) Secure the therapy mattress to the movable parts of the
bed frame or bed deck. Ensure buckles are securely
fastened and straps are pulled tightly.
DO NOT SECURE TO THE SIDE RAILS - STRAPS
WILL TEAR OFF.
CPR deflation valve
• Remove the quick connector on the left side of control unit to release the air
immediately from the mattress for rapid deflation. Deflation time varies depending
on patient weight and profile..
Quick Connector
• Used to connect the therapy mattress to the control unit.
5)
10
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the PreserveTech Harmony True 14200N and is the answer not in the manual?
Questions and answers
When the electricity goes off the mattress looses air. How can I stop the mattress from losing air until electricity is restored?
To prevent the Drive PreserveTech Harmony True 14200N mattress from losing air during a power outage, ensure that the mattress is equipped with its 2-inch foam base. This foam base provides support to the user even when the air cells lose pressure due to a power failure.
This answer is automatically generated
How do you know if the cells are alternating?
Press the "Alternate" button on the control panel to enable alternating therapy mode. The system will then cycle between air cells 1 and 2 to provide periodic pressure relief.
This answer is automatically generated