Samsung Galaxy Buds 2 User Manual page 25

Using the earbuds
Locking the earbuds' touch feature
You can prevent unintended actions by locking the earbuds' touch feature.
Launch the Galaxy Wearable app on the mobile device and tap the Touch controls switch to
deactivate it.
Setting a touch-and-hold feature
You can set a touch-and-hold feature of each earbud to activate features quickly and
conveniently.
1
Launch the Galaxy Wearable app on the mobile device, tap Touch controls, and then tap
the switch to activate it.
2
Tap the Touch and hold switch to activate it.
3
Tap Touch and hold and select touch-and-hold features for each earbud under Left or
Right.
• Switch noise controls: The following features will be launched in order whenever you
touch and hold the earbud: active noise canceling and ambient sound mode. Refer to
Activating the noise controls mode
• Bixby: Start a conversation with an intelligent voice assistant service. When using Bixby,
refer to Using Bixby
• Volume down/Volume up: Adjust the volume.
• If you select the volume adjustment feature as one side's touch-and-hold feature,
the other side's touch-and-hold feature is also automatically set to the volume
adjustment feature.
• When the volume adjustment feature has been already selected and you try to
change the one side's touch-and-hold feature, the other side's touch-and-hold
feature is automatically set to activate the noise controls mode.
for more information.
for more information.
25