Removing The M.2 2280 Pcie Solid-State Drive (Slot-0) - Dell Precision 3260 Compact Service Manual

About this task
The following image(s) indicate the location of the solid-state drive and provides a visual representation of the installation
procedure.
Steps
1. Align the notch on the 2230 solid-state drive with the tab on the M.2 card slot on the system board.
2. Slide the 2230 solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x3.5) that secures the 2230 solid-state drive to the system board.
4. Place the computer in an upright position.
Next steps
1. Install the hard-drive assembly.
2. Install the riser card—optional.
3. Install the processor fan.
4. Install the side cover.
5. Follow the procedure in

Removing the M.2 2280 PCIe solid-state drive (slot-0)

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the processor
4. Remove the riser card—optional.
after working inside your
before working inside your
fan.
computer.
computer.
Removing and installing components 39