Peak Load Prevention; Select Kom Module; Availability Of Miele Digital Products; Wifi / Lan - Miele PDR 914 Operating And Installation Instructions

Supervisor level
The peak-load negotiation function enables the tumble dryer to be connected to an en-
ergy-management system. When a signal is registered, the tumble dryer's heater is
switched off for a short period or the appliance is prevented from being switched on.
The tumble dryer may only be operated with a peak-load system if this system is con-
nected to the tumble dryer via the Miele XCI Box.
- Factory default: No function
- Peak load with 230 V
- Peak load with 0 V

Peak load prevention

With this function, the application of a hygiene program is not amended when a peak-
load signal is in place. The heater stays switched on.
- Factory default: Off
- On

Select KOM module

This tumble dryer is equipped with an integrated WiFi module. However, the tumble dryer
can also be equipped with an external module.
- Off
- Internal module (factory default)
The internal WiFi module is used.
- External module
An XKM module or RS232 module is inserted into the module slot.

Availability of Miele digital products

The ability of Miele digital products depends on the availability of the services in your
country.
The different services are not available in all countries.
For information about availability, please visit www.miele.com.

WiFi / LAN

Control the networking of your tumble dryer.
- Deactivate (visible when the network is activated)
The network remains set up; the WiFi function is switched off.
- Activate (visible when the network is deactivated)
The WiFi function is reactivated.
- Connection status (visible when the network is activated)
The following values are displayed:
– The quality of WiFi reception
– The network name
– The IP address
48