Supervisor level
Moving programs/favorites
You can move/change the order of the programs (program menu – single option list). You
can also move and change the order of the favorites that you edit in the Supervisor level
under Favorite programs.
Touch the program that you wish to move.
Press and hold the sensor control until the frame changes.
Drag the program to the required place.
Program color allocation
You can assign a specific color to a favorite program. In the list of favorites, each favorite
program is given a colored frame, which can be adjusted.
- Factory default: Off
- On
Process technology
Anti-crease
At the end of the program, the drum will continue to rotate at intervals if the laundry is not
removed immediately.
Changing this setting leads to increased energy consumption.
The setting can be switched off or a time between 1 and 12 hours can be selected.
Factory default: 2 hours
Drying levels
Changing this setting leads to increased energy consumption.
You can alter the drying levels for the
iron
programs.
Drying levels
Cottons
levels.
Factory default: Normal
Additional cooling
Before the end of the program, the temperature of the dried laundry is monitored and the
cooling phase at the end of the program is extended if necessary.
Changing this setting leads to increased energy consumption.
- Factory default: Off
- On
Cooling down temperature
The laundry will be cooled down automatically before the end of the program. The auto-
matic cooling-down phase which takes place before the end of a program can be set at a
cooler level for all programs. This means that the cooling phase is extended.
44
Cottons
,
Minimum Iron
, and
Minimum Iron
,
Automatic Plus
can be set to one of 7 different
Automatic Plus
,
, and
Machine