Control your Washer Dryer with your Smartphone
To remotely control your washer dryer from your smartphone, please follow the steps below.
If pairing has not been completed, the machine cannot be set to remote control standby.
Put the remote control in standby
1
Operation of the washer dryer
Close the door.
Press
Wait for the communication lamp
to light up.
Please wait while the light is flashing as it is preparing
for communication.
2
Press
Each press changes the display and allows you to make changes.
The display and sound indicate when the setting is complete.
Lights out
No setting - "Beep"
(To release the remote-control
standby state)
When the remote-control standby mode is set, 「
●
or lid from being opened and the door or lid is locked.
When the communication lamp is flashing, the remote-control standby mode cannot be set because
●
communication is being prepared.
The remote-control standby mode is automatically released when the power is switched off or the
●
operation is finished.
When the remote-control standby mode is set, the power is automatically turned off after 23 hours of
●
inactivity.
to switch on
Lights on
With setting - "Bleep"
(To set the remote-control
standby state)
」 (Symbolic "Door lock") lights up to prevent the door
(P.63)
Door
29