Return To Home - Holy Stone HS550 Instructions For Use Manual

10.4 Return to Home (RTH)
The Return to Home function brings the drone back to the last recorded Home
Point.
The Home Point is the location from which the drone first takes off or where the
GPS receives a signal from 7 or more satellites for the first time during flight. The
current position of the drone will be recorded as the Home Point.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
10.4.1 Smart RTH
If the GPS signal is available
recorded previously, press the "
fly back to the Home Point.
Exit the RTH Mode by pressing the "
Joystick .
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
10.4.2 Failsafe RTH
If the GPS signal is available
previously. Failsafe Return will be triggered when the transmitter signal is lost for
more than 6 seconds. The drone will automatically start the return procedure
which is to fly back to the last recorded Home Point. You can exit the Failsafe RTH
Mode by pressing the "Return to Home" button or pushing the Throttle Joystick if
the transmitter signal is recovered.
During the Failsafe Return procedure, the drone can not avoid obstacles.
The drone cannot Return-to-Home if the GPS signal is weak (connected satellites
number is less than 7).
If there is no GPS signal or the transmitter signal has been lost for more than 6
seconds, the drone will not Return-to-Home but it can descend slowly until it lands
on the ground. Then the drone will lock itself.
(7 or more satellites reception)
" button on the transmitter and the drone will
" button again or pushing the Throttle
(At least 7 satellites)
-28-
and the Home Point is
and the Home Point is recorded