Cleaning The Machine - Samsung SF-555P User Manual

Cleaning the Machine

To maintain print quality, follow the cleaning procedures below every
time the toner cartridge is replaced or whenever print quality problems
occur. As much as possible, keep your machine free from dust and
debris.
Note:
• Do not use ammonia-based sprays or volatile solvents such as thinner to
• While cleaning the inside of the machine, be careful no to touch the
Cleaning the Outside
Wipe the outside surfaces of your machine with a soft, clean, and lint-
free cloth. You can dampen the cloth slightly with water, but be careful
not to let any water drip onto the machine or inside it.
Cleaning the Inside
During the printing process, paper, toner, and dust particles can
accumulate inside the machine. Over time, this buildup can cause print
quality problems such as toner specks or smearing. Cleaning inside the
printer will eliminate or reduce these problems.
1. Turn the machine off and unplug the power cord, then wait for the
2. Pulling the cover release buttons toward you, open the cover and
3. With a dry, lint-free cloth, wipe away any dust and spiled toner from
Maintenance
6.4
All manuals and user guides at all-guides.com
clean the machine, as these can damage the machine's surface.
transfer roller (located underneath the toner cartridge). The oil from your
hands on the roller can cause print quality problems.
machine to be cool.
remove the toner cartridge.
Note: To prevent damage to the toner cartridge, do not expose it to
light for more than a few minute. Cover it with a piece of paper,
if necessary.
the toner cartridge area and the toner cartridge cavity.