dji RONIN 4D User Manual page 47

DJI Ronin 4D User Manual
Focus Assistant
The function of the PEAK button is set to Focus Peaking by default and can be switched to LiDAR
Waveform and Focus Magnify (2x and 4x).
After enabling focus peaking, the focus area will be shown in sharp focus but will not affect the recording
footage. Peaking mode can be set to Color or Aperture, Peaking Color can be set to red, green, or blue,
and the peaking level can be set to high, medium, and low.
After enabling LiDAR Waveform, the measurement distance information within the focus area will be
show as the top view in the high-bright main monitor screen.
Press the PEAK button of the right hand grip or high-bright main monitor to enable or disable focus
assistant. When the function of the PEAK button is set to Focus Mag, it is used to magnify the focus
area. When it is set to LiDAR Waveform, the PEAK button is used to enable or disable LiDAR Waveform.
LiDAR Waveform cannot be used when recording in certain resolutions. Peaking Focus, Focus Mag,
and LiDAR Waveform can be enabled simultaneously.
Monitor
Tap to set the Frame Guide, Frame Guide Transparency, Safety Zone, Safety Ratio, Monitor LUT, Center
Marker, LCD Brightness, and Rotate in the Monitor.
©
46 2022 DJI All Rights Reserved.