dji RONIN 4D User Manual page 37

DJI Ronin 4D User Manual
main monitor menu to set to an imperial or metric unit.
Depth of field within the yellow dash line can be displayed on MF readings and LiDAR waveform
when the aperture has been read.
7. Current Reel Information
Display the reel information of the latest footage.
8. Resolution
Tap to select the resolution. Note that some resolution changes will cause the image area and
recording codec to change. Refer to the Frame Rate Setting table for more information.
9. Timecode/Clip Duration
Tap to switch between displaying the timecode and clip duration. The timecode display format is
"hour: minute: second: non-drop frame" or "hour: minute: second; drop frame". The clip duration
display format is "hour: minute: second. centisecond". The timecode and clip duration are displayed
in red while recording. Tap and hold the icon or press and hold the button below to enter advanced
settings.
Run Mode
The Run mode can be set to Free Run or REC Run. When set to Free Run, the time code will add
one frame for every frame the sensor generates regardless of whether the camera is recording
or not. When the project frame rate is different from the sensor frame rate, the camera will
automatically switch to REC Run as the time code frame rate cannot match the sensor frame rate.
When set to REC Run, the time code will only add one frame for every frame generated by the
sensor during recording and the time code will be continuous throughout all recorded footage.
Mode
Mode can be set to Regen, Preset, or Jam Synced. Regen can only be selected in REC Run mode.
The timecode will continue on from the time code of the last frame to ensure the timecode follows
the footage continuously. Preset can be selected in both run modes. In Preset mode, tap TC
settings or Reset TC to customize the initial value. Jam Synced can only be selected in Free Run
mode and requires an SN external timecode synchronizer and the DJI Ronin 4D Expansion Plate
(SDI/XLR/TC).
Count Mode
Count mode can be set to Drop Frame or Non-Drop Frame. In Drop Frame mode, the timecode
will skip the first two frames of each minute except every 10th minute. The Drop Frame will be used
when the project frame rate is 29.97fps or a multiple of 29.97fps. In Non-Drop Frame mode, the
timecode will count every frame the sensor generates.
TC Settings and Reset TC
The timecode can be customized and is only available in Preset mode.
10. Center Marker
The Center Marker can be set to Off, Small, or Large by entering the menu and selecting Display,
Monitor, and Center Marker.
11. White Balance
Tap or press the button to set the color temperature. The color temperature can help to analyze
white color and other colors. The default color temperature list includes 3200K, 4000K, 5600K,
and 6500K. Tap and hold to access advanced settings. Tap Add to set the color temperature and
color cast. The color temperature can be set from 2000K to 11000K. The higher the value, the
warmer the color, and vice versa. The color cast can be set from -99 to +99. The positive number is
magenta gain and the negative number is green gain. Tap Add to List to add the color temperature
©
36 2022 DJI All Rights Reserved.