Connecting The Dispensing Pumps; Steam Connection - Miele PW 6241 Operating And Installation Instructions

The motor is protected against overload by winding protection.
Please refer to the wiring diagram and installation plan provided.
These plans are important for the electrical connection.

Connecting the dispensing pumps

Connection terminals for 4 time-controlled dispensing pumps, which
can be operated without a multifunction module, are located behind
the cover adjacent to the electrical connection. See enclosed wiring
diagram.

Steam connection

The steam connection may only be carried out by a registered install-
ation technician. See the installation plan and installation instructions
provided.
The steam valve and the condensate separator are available from
Miele dealers or the Miele Customer Service Department.
Once the machine has been successfully installed and connected,
replace all the casing parts that were removed.
 Risk of electric shock and injury from live or rotating machine
parts.
If the washing machine's casing is not fully assembled, it is pos-
sible to come into contact with live or rotating machine parts.
Once the washing machine has been installed, completely reas-
semble all the casing parts that were removed.
Installation
69