Communication Module; Operating Data - Miele PW 6241 Operating And Installation Instructions

Optional modules
42
The programme is resumed automatically when the peak-load func-
tion finishes.

Communication module

The machine can be connected to a PC (personal computer) using
the communication module.
The slot for the communication module is located on the back of the
machine.
An Editor programme is available for this from your sales and service
centre or your Miele dealer.

Operating data

With the Operating data module, Operating data can be read or de-
leted via the  "Operating data" button either before programme
start or at the end of the programme.
Cottons hygiene
1
2 Cottons
Cottons Intensive
3
 
Press the  "Operating data" button.

When the  button is pressed, the following appears in the display:
Operating data module
Total data
Programme data

You have the following options:
Total data
-
Data from all programmes is collected and added together in Total
data.
Programme data
-
Programme data is data which is recorded during a programme.
Delete data
-
Module
- (delete total data and programme data)
- Total data (only delete total data)
Programme data
- (only delete Programme data)
Tip: The function can be deselected by pressing the  "Operating
data" button again.
If the data storage capacity in the Operating data module is full, a
message appears when the "START" button is pressed to inform
you that Operating data will be overwritten.
90 °C
60 °C
60
°C

 

