Mitsubishi Electric OUTLANDER PHEV Dismantling Manual page 32

Procedure 25
Remove battery assembly from vehicle
Handle with care while working on the battery. If the drive battery is severely damaged,
there is a risk of electrical shock and/or fire even after the high voltage circuit has been
shut off.
① Install service lid and O-ring to battery to prevent any water penetration into battery.
Front of Vehicle
Service access lid
Front of Vehicle
O-ring must be assembled onto
service lid before installing
service lid to drive battery.
Step 1: Assemble an O-ring and
service lid.
Step 2: Attach the assembled
service lid and O-ring to drive
battery.
30
O-ring