Ceiling-Mounted; Powering The Camera On - Huawei VPC800 User Manual

Ceiling-Mounted

Others

Powering the Camera On

Connect the cables and power adapter to the camera and press the power button. About 18
seconds later, video appears on the display. The camera faces forward the first time you power it
on. Afterward, each time the camera is powered on, it restores to the position where it stays
before being powered off.
If the HD-VI port of the camera is connected to a TEX0 or TX series videoconferencing endpoint,
you do not need to connect the power adapter to the camera or press the power button. When the
videoconferencing endpoint is powered on, it supplies power to the camera to power the camera
on.
Purchase a bracket for ceiling-mounted installation and mount the
VPC800 onto the ceiling using the bracket. The bracket must meet the
following requirements:
It is able to bear a weight of at least 8.5 kg (18.74 lb) and has a
thickness between 2 mm (0.08 in.) to 3 mm (0.12 in.).
It comes with a location pillar, which can be inserted into the location
hole of the VPC800. The distance between the screw hole on the bracket
and location pillar must be 14.5 mm (0.57 in.), which is also the distance
between the two holes on the bottom of the VPC800.
It comes with a screw hole and one or more 1/4"-20UNC screw.
When attaching the purchased bracket and VPC800, it is
recommended that you use a 1/4"-20UNC screw delivered with the
purchased bracket rather than a 1/4"-20UNC screw delivered with the
VPC800 because the length of the latter may be too long or too short to
hold up the purchased bracket.
Install the camera on a tripod (separately purchased).
7