Mitsubishi Electric Ecodan HUS210FTC4ST Installation Manual page 60

Main Controller
26
Setting the Schedule Timer
1. In the preview menu screen press F4 button.
(* In the case of 2-zone system, press F1 button to
switch between Zone1 and Zone2).
2. First select the days of the week you wish to
schedule.
3. Press F2/F3 buttons to move between days and
F1 to check or uncheck the box.
4. When you have selected the days press CONFIRM.
5. The time bar edit screen will be displayed.
6. Use buttons F2/F3 to move to the point at which
you do not want the selected mode to be active
press CONFIRM to start.
7. Use F3 button to set the required time of inactivity
then press CONFIRM.
8. You can add up to 4 periods of inactivity within a
24 hour interval.
9. Press F4 to save settings.
When scheduling heating, button F1 changes the scheduled
variable between time and temperature. This enables a lower
temperature to be set for a number of hours e.g. a lower
temperature may be required at night when the occupants
are sleeping.
Note:
• The schedule timer for space heating and DHW are set in the same way.
However for DHW only time can be used as scheduling variable.
• A small rubbish bin character is also displayed choosing this icon will delete the last unsaved action.
• It is necessary to use the SAVE function F4 button to save settings. CONFIRM does not act as SAVE
for this menu.
FTC4 Installation Manual
60
(continued)