Engine Disassembly / Inspection - Top End; Valve Cover Removal; Camshaft Removal - Polaris RANGER XP 900 2013 Manual

Hide thumbs Also See for RANGER XP 900 2013:

Table of Contents

ENGINE DISASSEMBLY / INSPECTION - TOP END

The valve cover can be removed with the engine

installed in the chassis.

1. Remove the four valve cover shoulder bolts

using a T40 driver.

Replace rubber isolators upon assembly.

2. Remove valve cover and valve cover seal. Replace

isolators and valve cover seal

3. Remove the spark plugs

with clean shop towels to prevent any debris from

falling into the combustion chamber.

if oil leaks are

. Stuff spark plug holes

9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual

The camshafts can be removed with the engine

1. Rotate the engine so the PTO cylinder is at Top

Dead Center (TDC) to relieve most of the valve

spring pressure. The camshaft lobes should face out

and the slots on the end of the camshafts should line

installed in the chassis.

Table of Contents