Configure The Ipv6 Switch - Zte H3140 Maintenance Management Manual

Steps
1. On the main page of the H3140, select Management&Diagnosis > MAC Table to
the MAC Table page, see
Figure 7-17 MAC Table Page
2. Click Refresh button to refresh information.

7.11 Configure the IPv6 Switch

Abstract
This procedure describes how to enable or disable IPv6 support for the H3140.
Steps
1. On the main page of the H3140, select Management&Diagnosis > IPv6 Switch to
the IPv6 Switch page, see
Figure 7-18 IPv6 Switch Page
2. To disable IPv6 support, set IPv6 Function to Off, and click Apply.
The configuration takes effective after the device is restarted.
SJ-20210621164956-009 | 2021-12-07(R1.0)
Figure
Note
7 Configure the Management and Diagnosis
7-17.
Figure 7-18.
89