Boat Inflation - Zodiac MILPRO HEAVY DUTY Series Owner's Manual

WARNING
NOTE
Insure that all valves are in the inflation
position.
Attach the pump hose tip to the valve on the
buoyancy.
INFLATE THE BUOYANCY TUBE
Set in the floorboard and the stringers before to inflate the buoyancy tube.
Inflate the buoyancy tube until green area of the pressure indicator.
Screw the cap after inflation.
Close the valves (navigation position) (See APPENDIX page A-9).
INFLATE THE KEEL
Inflate the keel after having adjusted the buoyancy tube pressure.
Close the valve after inflation (See APPENDIX page A-4).
NOTE

BOAT INFLATION

Illustrations in APPENDIX page A-9
DO NOT USE AN AIR COMPRESSOR OR AN AIR CYLINDER.
Do not inflate boats stacked one over the other.
A slight loss of air is normal before the cap is screwed on. Only the cap
assures total air tightness.
6/10