Grandstream Networks HT813 Administration Manual
  1. Manuals
  2. Brands
  3. Grandstream Networks Manuals
  4. Receiver
  5. HT813
  6. Administration manual

Grandstream Networks HT813 Administration Manual

Fxs/fxo port analog telephone adaptor
Hide thumbs Also See for HT813:
Table of Contents

Advertisement

Quick Links

https://arttel.ru/
Grandstream Networks, Inc.
HT813
FXS/FXO Port
Analog Telephone Adaptor
Administration Guide
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT813 and is the answer not in the manual?

Questions and answers

Related Manuals for Grandstream Networks HT813

Summary of Contents for Grandstream Networks HT813

  • Page 1 Grandstream Networks, Inc. HT813 FXS/FXO Port Analog Telephone Adaptor Administration Guide https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 2 Grandstream Networks, Inc. is not permitted. The latest electronic version of this user manual is available for download here: http://www.grandstream.com/support Grandstream is a registered trademark and Grandstream logo is trademark of Grandstream Networks, Inc. in the United States, Europe and other countries. CAUTION...
  • Page 3 GNU GPL INFORMATION The firmware for the HT813 contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License (GPL) for the exact terms and conditions of the license.

  • Page 4: Table Of Contents

    Equipment Packaging .......................... 13 HT813 Ports Description ........................13 Connecting HT813 ..........................14 Scenario 1: Connecting the HT813 using WAN Port ..............14 Scenario 2: Connecting the HT813 using LAN Port ..............14 HT813 LEDs Pattern ..........................15 CONFIGURATION GUIDE .................... 17 Obtain HT813 IP Address via Connected Analogue Phone ..............
  • Page 5 Important Settings ..........................65 NAT Settings ..........................65 DTMF Methods ..........................66 Preferred Vocoder (Codec) ......................66 Configuring HT813 Through Voice Prompts ..................66 Configuration through a Central Server ....................67 Register a SIP Account ........................68 Rebooting HT813 from Remote ......................70 Call Features ............................
  • Page 6 Table of Tables Table 1: HT813 Features at a Glance ......................10 Table 2: HT813 Technical Specifications ....................11 Table 3: HT813 Connectors Definitions ...................... 14 Table 4: HT813 LEDs Pattern Description ....................16 Table 5: Voice Prompt Menu ........................17 Table 6: Status Page Definitions .........................

  • Page 7: Document Purpose

    DOCUMENT PURPOSE This document describes the basic concept and tasks necessary to use and configure your HT813. It covers also the topic of connecting and configuring the HT813, making basic operations and the call features. to download the latest “HT813 User Guide”.

  • Page 8: Change Log

    CHANGE LOG This section documents significant changes from previous versions of admin guide for HT813. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. Firmware Version 1.0.1.2 ...

  • Page 9: Gui Interface Examples

    1. Screenshot of Login Page 2. Screenshots of Status Page 3. Screenshots of Basic Settings Page 4. Screenshots of Advanced Settings Page 5. Screenshots of FXS Port Page 6. Screenshots of FXO Port Page P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...

  • Page 10: Welcome

    WELCOME Thank you for purchasing Grandstream’s HT813, It is the first ATA in the HandyTone 81x series offering functions as a true 3-in-1 gateway for PSTN network, analog telephone FXS interface and IP network. It enables remote call origination and termination from/to PSTN. The HT813 is specifically designed to be an easy to use and affordable VoIP solution for both the residential user and the remote user.

  • Page 11: Product Overview

    FXO port. The integration of FXO and FXS ports enables remote call origination and termination to and from the PSTN line. The 1 FXS port allows for extension of a VoIP service to 1 analog phone. HT813’s ultra-compact size, voice quality, advanced VoIP functionality, security protection and auto provisioning options enable users to take advantage of VoIP on analog phones and enables service providers to offer high quality IP service.

  • Page 12: Ht813 Technical Specifications

    HT813 Technical Specifications The following table resumes all the technical specifications including the protocols/standards supported, voice codecs, telephony features, languages and upgrade/provisioning settings for the HT813. Table 2: HT813 Technical Specifications Interfaces Telephone Interfaces One (1) RJ11 FXS port, One (1) RJ11 FXO PSTN line port with lifeline support...
  • Page 13 Storage: 14° – 140°F or -10º – 60ºC Humidity: 10 – 90% Non-condensing Dimensions and 130.5 x 90.5 x 29 mm (L x W x D) Weight Weight: 0.142Kg Compliance Compliance FCC/CE/C-TICK/ITU-K.21 P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...

  • Page 14: Getting Started

    Note: Check the package before installation. If you find anything missing, contact your system administrator HT813 Ports Description The following figure describes the different ports on the back panel of the HT813. Figure 2: HT813 Back Panel P a g e HT813 Administration Guide Version 1.0.1.2...

  • Page 15: Connecting Ht813

    2. Connect the WAN port of the HT813 to a router, switch or modem using an Ethernet cable. 3. Insert the power adapter into the HT813 and connect it to a wall outlet and make sure to respect the technical specifications of the power adapter used.

  • Page 16: Ht813 Leds Pattern

    Connect a computer or switch to the LAN port of the HT813 using an Ethernet Cable. Insert the power adapter into the HT813 and connect it to a wall outlet and make sure to respect the technical specifications of the power adapter used.

  • Page 17: Table 4: Ht813 Leds Pattern Description

    LED Lights Status Power LED The Power LED lights up when the HT813 is powered on and it flashes when the HT813 is booting up. WAN LED The WAN LED lights up when the HT813 is connected to your network through the WAN port.

  • Page 18: Configuration Guide

    Obtain HT813 IP Address via Connected Analogue Phone HT813 is by default configured to obtain the IP address from DHCP server where the unit is located. To know which IP address is assigned to your HT813, you should access to the “Interactive Voice Response...
  • Page 19 “IP Address “ + IP address The current WAN IP address is announced If using “Static IP Mode”, enter 12-digit new IP address. You need to reboot your HT813 for the new IP address to take Effect. “Subnet “ + IP address Same as menu 02 “Gateway “...

  • Page 20: Configuration Via Web Browser

    Subnet…) to apply the new configuration. Configuration via Web Browser The HT813 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow a user to configure the HT813 through a web browser such as Google Chrome, Mozilla Firefox and Microsoft’s IE. ...

  • Page 21: Accessing The Web Ui

    4. Enter the administrator’s password to access the Web Configuration Menu. Note: The computer must be connected to the same sub-network as the HT813. This can be easily done by connecting the computer to the same hub or switch as the HT813.

  • Page 22: Saving The Configuration Changes

    Changing Admin Level Password 1. Access your HT813 web UI by entering its IP address in your favorite browser. 2. Enter your admin password (default: admin).

  • Page 23: Changing Viewer Password

    Changing Viewer Password 1. Access your HT813 web UI by entering its IP address in your favorite browser. 2. Enter your admin password (default: admin). 3. Press Login to access your settings. 4. Go to Basic Settings  New Viewer Password and enter the new viewer password.

  • Page 24: Web Configuration Pages Definitions

    Figure 8: Web HTTP(S) Port Web Configuration Pages Definitions This section describes the options in the HT813 Web UI. As mentioned, you can log in as an administrator or an end user.  STATUS: Displays the system info, network status, account status, and line options.

  • Page 25: Basic Settings

    Displays the hardware revision information and the part number.  Software Version Program: Specifies Program version. This is the main firmware release number, which is always used for identifying the software system of the HT813.  Bootloader: Specifies Boot version. ...
  • Page 26 “HTTPS” is selected, web UI will be accessed using HTTPS. Default is “HTTP”. HTTP Web Port Customizes HTTP port used to access the HT813 web UI. Default is 80. HTTPS Web Port Customizes HTTPS port used to access the HT813 web UI. Default is 443.
  • Page 27 Note: Make sure to reboot the ATA for the changes to take effect. IPv4 Address Allows users to configure the appropriate network settings on the HT813 to obtain IPv4 address. Users could select "DHCP", "Static IP" or "PPPoE". By default, it is set to "DHCP".
  • Page 28 WAN Only: In this mode, only WAN port is active. LAN port is not used. Default mode is NAT Router. Save the setting and reboot prior to configuring the HT813. NAT Maximum Defines the number of ports that can be managed while in NAT router mode.
  • Page 29 128kbps limited for internal system, signaling and NATed traffic. Voice or RTP stream will never be limited. When set to “Yes”, the HT813 acts as an UPnP gateway for your UPnP enabled Enable UPnP Support applications.
  • Page 30 LAN DHCP Start IP Default value is 100. The last segment of IP address assigned to the HT813 in the LAN Network. Default configuration assigns IP address (to local network devices) starting from 192.168.2.100. LAN DHCP End IP Default value is 199. This parameter allows a user to limit the number of local network devices connected to the internal router.

  • Page 31: Advanced Settings

    NAT routers work with STUN. Keep-alive Interval Sends periodically a blank UDP packet to SIP server in order to keep the "ping hole" on the NAT router open. Default is 20 seconds. P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 32 Default is fm.grandstream.com/gs. Config Server Path Sets IP address or domain name of configuration server. The server hosts a copy of the configuration file to be installed on the HT813. Default is fm.grandstream.com/gs. XML Config File Password Decrypts XML configuration file when encrypted. The password used for encrypting the XML configuration file using OpenSSL.
  • Page 33 Configure the HT813 to search for the new firmware when the firmware prefix when F/W pre/suffix changes / suffix changes. When this option is selected, the HT813 will check for updates only when the pre/suffix has been changed. Configures the HT813 to skip the firmware check, when this option is selected...
  • Page 34 Certificates The device needs to reboot after changing the setting. SIP TLS Certificate Specifies SSL certificate used for SIP over TLS is in X.509 format. The HT813 has built-in private key and SSL certificate. SIP TLS Private Key Specifies TLS private key used for SIP over TLS is in X.509 format.
  • Page 35 Users with security level authNoPriv and context name as auth.  privUser: Users with security level authPriv and context name as priv. Select the Authentication Protocol: “None” or “MD5” or “SHA”. SNMPv3 Trap Authentication Protocol P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 36 Set RADIUS shared secret. Configure RADIUS VSA Vendor ID to match RADIUS server's configuration. RADIUS VSA Vendor ID Default is 42397 for Grandstream Networks Inc. RADIUS VSA Access Level Configure RADIUS VSA Access Level Attribute to match RADIUS server's Attribute configuration.
  • Page 37 Maximum allow 10 SIP numbers and each number should be separated by a comma (‘,’) in web UI. Other allowed characters are 0-9, comma (“,”), asterisk (‘*’), pound sign (‘#’) and plus sign (‘+’). P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 38 URL or IP address of syslog server. Syslog Level Select the HT813 to report the log level. Default is NONE. The level is one of EXTRA DEBUG, DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events: 1.

  • Page 39: Fxs Port Page Definitions

    Configures SIP server IP address or domain name provided by VoIP service provider. Primary SIP Server This is the primary SIP server used to send/receive SIP messages from/to HT813. Specifies failover SIP server IP address or domain name provided by VoIP service Failover SIP Server provider.
  • Page 40 Outbound Proxy register via primary outbound proxy. By default, this option is disabled. Allow DHCP Option Configures the HT813 to collect SIP server address from DHCP option 120. 120 (override SIP Default is No. Server) Selects transport protocol for SIP packets; UDP or TCP or TLS. Please make sure your SIP Transport SIP Server or network environment supports SIP over the selected transport method.
  • Page 41 Enabled: "Tel:" will be used instead of "sip:" in the SIP request. Please consult your carrier before changing this parameter. Default is Disabled. Controls whether the HT813 needs to send REGISTER messages to the proxy server. SIP Registration Default setting is Yes.
  • Page 42 Local SIP Port value for FXS is 5060. Defines the local RTP-RTCP port pair the HT813 will listen and transmit. It is the HT813 Local RTP Port RTP port for channel 0. The default value for FXS port is 5004.
  • Page 43 Checks SIP User ID in the Request URI of incoming INVITE; if it doesn't match the Check SIP User ID for Incoming HT813 SIP User ID, the call will be rejected. Direct IP calling will also be disabled. INVITE Default is No.
  • Page 44 Selects the Caller ID display order which need to be respected by the HT813. The Order available options are: ● Auto: When set to “Auto”, the HT813 will look for the caller ID in the order of P- Asserted Identity Header, Remote-Party-ID Header and From Header in the incoming SIP INVITE. ●...
  • Page 45 Off Hook Auto Dial Specifies the auto-dial delay after off hook. Delay Determines a SIP Extension to notify the SIP server that the HT813 is behind a Proxy-Require NAT/Firewall. Defines NAT IP address used in SIP/SDP messages. It should only be used if required Use NAT IP by ITSP.
  • Page 46 (Incomplete Address). Otherwise, the call will likely be rejected by the proxy (with a 404 Not Found error). Default is No. This feature is NOT designed to work with and should NOT be enabled for direct IP-to- IP calling. P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 47 Treats “#” as the “Send” (or “Dial”) key. If set to “No”, this “#” key can be included as part of the dialed number. Use # as Dial Key Default is Yes. P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 48 In this case * should be predefined inside dial plan feature. As an example { *x+ } will allow to dial * followed by any length of numbers. P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 49 Specifies which end will act as refresher for incoming calls:  UAS Specify UAS: The handy tone acts as the refresher.  Refresher UAC: Callee or proxy server act as the refresher. Default is Omit. P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 50 Symmetric RTP inbound RTP packet last received by the device. Default is No. Specifies the fax mode: T.38 (Auto Detect) FoIP by default, or Pass-Through (must use Fax Mode codec PCMU/PCMA) P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 51  ETSI-DTMF during ringing  ETSI-DTMF prior to ringing with DTAS  ETSI-DTMF prior to ringing with LR+DTAS  ETSI-DTMF prior to ringing with RP  SIN 227 – BT P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 52 Polarity Reversal Reverses the polarity upon call establishment and termination. Default is No. Allows the traditional PBX used with HT813 to apply this method for signaling call Loop Current termination. Method initiates short voltage drop on the line when remote (VoIP) side Disconnect disconnects an active call.

  • Page 53: Fxo Port Page Definitions

    Configures SIP server IP address or domain name provided by VoIP service provider. Primary SIP Server This is the primary SIP server used to send/receive SIP messages from/to HT813. Specifies failover SIP server IP address or domain name provided by VoIP service Failover SIP Server provider.
  • Page 54 By default, this option is disabled and the DNS SRV will use first SRV instead of the registered IP. Indicates E.164 number in “From” header by adding “User=Phone” parameter or using “Tel:” in SIP packets, if the HT813 has an assigned PSTN Number.  Disabled: Use “SIP User ID” information in the Request-Line and “From”...
  • Page 55 Defines Diff-Serv values for SIP and RTP. Defaults are: SIP DSCP: 26 Layer 3 QoS RTP DSCP: 46 Defines local port to use by the HT813 for listening and transmitting SIP packets. Default Local SIP Port value for FXO port is 5062. P a g e HT813 Administration Guide Version 1.0.1.2...
  • Page 56 Defines the local RTP-RTCP port pair the HT813 will listen and transmit. It is the HT813 Local RTP Port RTP port for channel 0. The default value for FXS port is 5012. Controls whether to use configured or random SIP ports. This is usually necessary when...
  • Page 57 It is an estimate of the round-trip time between the client and server transactions. For example, the HT813 will attempt to send a request to a SIP server. The time it takes between sending out the request to the point of getting a response is SIP T1 Timeout the SIP T1 timer.
  • Page 58 RFC2833 Events Flash Digit Control Overrides the default settings for call control when both channels are in use. Determines a SIP Extension to notify the SIP server that the HT813 is behind a Proxy-Require NAT/Firewall. Defines NAT IP address used in SIP/SDP messages. It should only be used if required Use NAT IP by ITSP.
  • Page 59 In this case * should be predefined inside dial plan feature. As an example { *x+ } will allow to dial * followed by any length of numbers. P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 60 UAC: Callee or proxy server act as the refresher. Default is Omit. Force INVITE Always refresh with INVITE instead of UPDATE Default is No. INVITE Ring-No- Answer Timeout Between 5-300 seconds. Default 40 seconds. (sec) P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 61 Allows the unit to send out the re-INVITE for T.38 or Fax Pass Through if a fax tone is Tone Detected detected. Default is Enabled Jitter Buffer Type Selects jitter buffer type (Fixed or Adaptive) based on network conditions. P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 62 Range: -96 to -0dB. Default -40dB. (dB) FSK Caller ID Range is from 0 to 800 bits. Default 70. Seizure Bits FSK Caller ID Mark Range is from 0 to 800 bits. Default 40. Bits P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 63 Disables the NEC will per call base. Recommended for FAX/Data calls. Default is No. Echo Suppressor Outgoing Call Defines the call duration limit for the outgoing calls, Default is 0 (No limit). Duration Limit P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...
  • Page 64 FXO Termination This value should be used in case the PSTN provider uses line power drop to indicate call completion to the end point. In this case the HT813 will search for a power drop Enable Current Disconnect for a preconfigured time frame to disconnect such calls from a VoIP extension. Default is Yes.
  • Page 65 Default is 600R – 600 ohms Number of Rings This is the number of rings the HT813 will wait to send the call to the VoIP side in case the Caller ID has yet to be detected. If there's CID information the call will be sent right away.

  • Page 66: Important Settings

    This configuration is applicable for VoIP to PSTN calls and indicates one or two stage dialing methods. Min Delay Before The time to wait before HT813 initiates the call via PSTN line. Dial PSTN Number Default 500ms, range is from 50 to 65000ms.

  • Page 67: Dtmf Methods

    Select voice menu option 01 to enable HT813 to use DHCP.  STATIC IP MODE Select voice menu option 01 to enable HT813 to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively.

  • Page 68: Configuration Through A Central Server

    TFTP, FTP/FTPS or HTTP/HTTPS from the central server. A service provider or an enterprise with large deployment of HT813 can easily manage the configuration and service provisioning of individual devices remotely from a central server.

  • Page 69: Register A Sip Account

    Register a SIP Account The HT813 supports 2 SIP accounts. Please refer to the following steps in order to register your accounts via web user interface 1. Access your HT813 web UI by entering its IP address in your favorite browser.

  • Page 70: Figure 9: Fxs Port Settings

    After applying your configuration, your account will register to your SIP Server, you can verify if it has been correctly registered with your SIP server from your HT813 web interface under Status  Port Status  Registration (If it displays Registered, it means that your account is fully registered, otherwise it will display Not Registered so in this case you must double check the settings or contact your provider).

  • Page 71: Rebooting Ht813 From Remote

    Figure 10: Accounts Status Rebooting HT813 from Remote Press “Reboot” button at the bottom of the configuration menu to reboot the ATA remotely. The web browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in again.

  • Page 72: Call Features

    Call Features The HT813 supports all the traditional and advanced telephony features. Table 11: HT813 Call Features Call features Forcing a Codec (per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729 (G729), *027201 (iLBC). Disable LEC (per call) Dial “*03” +” number”.
  • Page 73 Toggles between active call and incoming call (call waiting tone). If not in conversation, Flash/ Hook flash/hook will switch to a new channel for a new call. Pressing pound sign will serve as Re-Dial key. P a g e HT813 Administration Guide Version 1.0.1.2 https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813...

  • Page 74: Upgrading And Provisioning

    UPGRADING AND PROVISIONING The HT813 can be upgraded via TFTP/FTP/FTPS/HTTP/HTTPS by configuring the URL/IP Address for the TFTPFTP/FTPS/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP or FTP/FTPS or HTTP/HTTPS (default is HTTPS); the server name can be FQDN or IP address.

  • Page 75: Upgrading Via Local Directory

    1. Download the firmware file from Grandstream web site 2. Unzip it and copy the file in to a folder in your PC 3. From the HT813 web interface (Advanced Settings page) you can browse your hard drive and select the folder you previously saved the file (HT8xfw.bin) 4.

  • Page 76: Managing Firmware And Configuration File Download

    Password. For a detailed parameter list, please refer to the corresponding firmware release configuration template. When the HT813 boots up or reboots, it will send a request to download a file named "cfgxxxxxxxxxxxx” followed by a configuration XML file named "cfgxxxxxxxxxxxx.xml", where "xxxxxxxxxxxx" is the MAC address of the phone, i.e., "cfg000b820102ab"...

  • Page 77: Restore Factory Default Settings

    To reset default factory settings using the reset button please follow the steps above: 1. Unplug the Ethernet cable. 2. Locate the reset hole on the back panel of your HT813. 3. Insert a pin in this hole, and press for about 7 seconds.

  • Page 78: Reset From Web Interface (Reset Type)

    Factory Reset will be disabled if the “Lock keypad update” is set to “Yes”. If the HT813 was previously locked by your local service provider, pressing the RESET button will only restart the unit. The device will not return to factory default settings.

  • Page 79: Experiencing The Ht813

    EXPERIENCING THE HT813 Please visit our website: http://www.grandstream.com to receive the most up- to-date updates on firmware releases, additional features, FAQs, documentation and news on new products. We encourage you to browse our product related documentation, FAQs User and Developer Forum for answers to your general questions.

Table of Contents

Save PDF