Download Print this page

Sealey LED013 Instruction Manual page 2

Cordless 36led rechargeable inspection lamp

Advertisement

4. OPERATION
4.1
Direct the lens away from your eyes before switching on.
Switch the lamp 'ON & OFF' using the push switch on
the handle.
4.2
Suspend the lamp by the hanging hook.
When the light is hanging from its hook it can be rotated
through 360° for more precise positioning.
4.3
You may also use the integral magnet to attach the lamp
to metalwork such as under-bonnet.
Note: LED arrays are designed to allow individual LEDs to
cease functioning without causing the entire array to fail.
This could be as a result of shock or impact. Shock or
impact will invalidate warranty.
Environmental Protection
Recycle unwanted materials instead of disposing
of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycle
centre and disposed of in a manner which is
compatible with the environment.
When the product is no longer required, it must be
disposed of in an environmentally protective way.
Battery Removal
1.
Remove six screws and open casing from front.
2.
Clip wires attached to main board and dispose
of battery according to local authority
guidelines.
Under the Waste Batteries and Accumulators Regulations
2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within
these regulations), that they are registered with Valpak's
registered compliance scheme. Jack Sealey Ltd's Batteries
Producer Registration Number (BPRN) is BPRN00705
Parts support is available for this product. To obtain parts please email sales@sealey.co.uk
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
or phone 01284 757500.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
Fig.1
Charging
LEDs
On-Off
Switch
Charge
Socket.
01284 757500
01284 703534
email
Rotating Suspension
Hook
Suspension
Magnet.
www.sealey.co.uk
Web
sales@sealey.co.uk
LED013
Issue: 3 - 22/12/11

Advertisement

loading