Mac Filter - Zte ZXHN H298N Maintenance Manual

Table 27 IP Filter Parameters
Parameter
Enable
Protocol
Name
Start Source IP Address/End Source IP
Address
Start Destination IP Address/End
Destination IP Address
Start Source Port/End Source Port
Start Destination Port/End Destination
Port
Ingress/Egress
Mode
3. Click Add.
IP filter is configured.

5.3 MAC Filter

Context
MAC filter aims at the user-side LAN, that is, the upstream data flow.
To configure MAC filter, perform the following steps:
Steps
1. Choose [Security→ MAC Filter].
2. Configure the MAC filter parameters, as shown in
Description
Select the check box to enable the IP filter item.
Select the protocol that needs to filter packets. By
default, it is TCP.
Name of the IP filter item
It cannot be null.
Filter condition
It can be null.
Filter condition
It can be null.
Filter condition
It can be null.
Filter condition
It can be null.
Data flow direction
The ingress and egress cannot be the same.
If the ingress is LAN
�
flow is upstream.
If the ingress is WAN and egress is LAN, the data
�
flow is downstream.
The mode can be Discard or Permit.
Figure 52.
71
and egress is WAN, the data