Table of Contents
Advertisement
4.3.1 DHCP Server
Context
To configure the
DHCP
Steps
1. Choose [Network→ LAN→ DHCP Server].
2. Set the DHCP server parameters, as shown in
Figure 34 DHCP Server
Table 16
lists the DHCP server parameters.
Table 16 DHCP Server Parameters
Parameter
LAN IP
Address/Subnet Mask
Enable DHCP Server
server, perform the following steps:
Description
IP address and subnet mask of the device in the LAN
The device IP address should be in the same network segment as
the DHCP address pool.
Enable the DHCP server.
Figure
34.
51
Advertisement
Table of Contents
Need help?
Do you have a question about the ZXHN H298N and is the answer not in the manual?
Questions and answers