Advertisement
DreamStation 2
Basic Setup & Return Instructions
Instructions: Basic Setup of DreamStation 2 Auto CPAP Advanced device
Disassemble your old machine.
1
• D isconnect the power supply, power cord, tubing, and mask.
• If applicable, please ensure the humidifier does not contain any water.
• Remove SD card (if applicable) and save for later.
Assemble the replacement sleep apnea therapy machine.
2
• Unpackage your replacement DreamStation 2 device and clean the humidifier water tank per cleaning
instructions in the user manual.
• For device components and accessories you have kept, clean per the cleaning instructions in the user manual.
• Connect the power supply and power cord to the bottom of the device and
plug in the power cord to an outlet not controlled by a light switch.
• Place SD card in replacement DreamStation 2 device (if applicable).
• Reattach the humidifier water tank by sliding it onto the device.
• Attach tube.
• Attach mask.
3
Allow for device settings to upload before starting therapy.
• Once the device is plugged in wait five minutes to allow the device settings to upload via the
integrated cell modem. In some instances you may see an on-screen pop appear informing you
of a prescription update/change.
NOTE: If applicable, verify that your new device serial number is now active in DreamMapper
by checking your DreamMapper account/app.
• P ress the therapy button to initiate air flow and ensure proper operation.
Your prescription pressure will be delivered.
NOTE: A solid ring indicates your prescribed therapy pressure is being delivered.
• Please reference the Patient Quick Start Guide and User Manual for more detailed information
about the device and operation.
• Your device is now ready to use.
Mapping of Device Settings
DreamStation Setting
Prescription Mode and Pressure
Tube Size
CFLEX or CFLEX+/AFLEX: Off, 1, 2, or 3
Mask Resistance
Fixed or Smart Ramp
Ramp Time: 5-45min (5 min increments)
Ramp Pressure
Opti-Start
NOTE: If you had a Ramp pressure set on your device, you will need to reset on the DreamStation 2 device
using the replacement Ramp Plus feature. This can be adjusted by tapping the Ramp Plus icon while therapy is
running and tapping the +/- icons until the desired and comfortable start pressure is achieved. After Ramp Plus
is set, the device will automatically deliver this pressure during the therapy session and future therapy sessions
without additional activation.
DreamStation 2 Setting
Matches DreamStation prescription setting
Matches DreamStation setting
(if heated tube attached, device will automatically detect)
FLEX (CFLEX+/AFLEX): Off, 1, 2, or 3
(value matches DreamStation setting)
Matches DreamStation setting
Ramp Plus
Ramp Plus Time: 15, 30, or 45 min
(matches to closest previous setting)
Ramp Plus pressure set to off
(patient to select desired starting pressure)
Enabled if enabled on DreamStation (will take 30 hours for
device to identify optimal pressure. Ramp Plus pressure
overrides Opti-Start pressure if activated)
2
Advertisement
