Maintenance - RIEJU MRT 125 LC Owner's Manual

MAINTENANCE

Transmission chain (adjustment and tension)
The chain must be adjusted to have 30 to 40 mm tole-
rance at the midpoint between the output gear and rear
pinion.
To adjust the proper tension, you must conduct these
steps on both and equal sides of the wheel:
1- Put the gearshift box in neutral and loosen the nut
and axle (1) of the rear wheel.
2- Loosen the fastening nut (3)
3- With the screws (2), adjust the chain's tension, ma-
king sure that there is always the same distance on
both sides of the axle. To this end, use the ruler marks
(4) on the swingarm.
4- Secure the position with the 2 nuts (3) and tighten
the nut that holds the rear wheel axle.
TIP: The chain must be kept perfectly clean and
adequately lubricate every week.
3 2 1 4
MRT 125 LC 43