Relay Operation - Polaris RZR 800 2013 Manual

Relay Operation

Located in the fuse box under the dash, the relays assist
with component operation like the cooling fan, fuel pump
and EFI system, drive system and EPS.
NOTE: The Rear Diff Solenoid Relay is mounted
separately, attached to the rear plastic LH panel
divider behind the driver's seat.
CHASSIS RELAY provides power to the following
systems:
• Lights (Headlights / Taillights)
• Drive (AWD / TURF)
• Accessory (12V Receptacles / Accessory Options)
Color
30-Amp fuse protected 12 Vdc constant
Red
battery voltage.
Relay coil ground.
Brown
12 Vdc power input from key switch to
Orange
enable relay.
Provides 12 Vdc power for lights, drive
White
and accessory circuits.
EFI RELAY provides power to the following systems:
• Fuel Injectors
• Cam Phase Sensor
• Ignition Coil
• Fan Relay
• Fuel Pump Relay
Color
20-Amp fuse protected 12 Vdc constant
Red / White
battery voltage.
ECU ground input to enable relay.
Dark Green / Yellow
20-Amp fuse protected 12 Vdc constant
Red / White
battery voltage.
Provides 12 Vdc power for EFI system
Red / Dark Blue
circuits.
FAN RELAY provides power to the following system:
Red
Orange / White
Red / Dark Blue
Orange / Black
FUEL PUMP RELAY provides power to the following
system:
Function
Red / Light Green
Dark Green / Yellow
Red / Dark Blue
Red / Light Blue
EPS RELAY provides power to the following system:
Red
Brown
Orange
Function
Orange
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
• Fan Motor
Color
20-Amp circuit breaker protected 12 Vdc
constant battery power.
ECU ground input to enable relay.
12 Vdc switched power from EFI relay.
Provides 12 Vdc power for fan operation.
• Fuel Pump
Color
10-Amp fuse protected 12 Vdc battery
voltage.
ECU ground input to enable relay.
12 Vdc switched power from EFI relay.
Provides 12 Vdc power for fuel pump
operation.
• Electronic Power Steering Unit
Color
30-Amp fuse protected 12 Vdc constant
battery voltage.
Relay coil ground.
12 Vdc power input from key switch to
enable relay.
Provides 12 Vdc power for EPS
operation.
ELECTRICAL
Function
Function
Function
10
10.27