Engine Breather Hose Inspection; Engine And Transmission Mounts; Compression Test Specification - Polaris RZR 570 2013 Service Manual

19. Re-check the oil level on the dipstick and add oil as
necessary to bring the level to the upper mark on the
dipstick.
20. Dispose of used oil and oil filter properly.

ENGINE BREATHER HOSE INSPECTION

The engine is equipped with a breather hose
the breather hose for possible kinks or wear. The hose is
form fitted for a proper fit. Follow the breather hose from
the engine crankcase to the air intake baffle box on the
left-hand rear fender panel.
NOTE
Make sure line is not kinked or pinched.
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.

ENGINE AND TRANSMISSION MOUNTS

Periodically inspect engine and transmission mounts for
cracks or damage.
Refer to Chapter 3 "Engine Assembly and Installation" for
mounting fastener torque values.

COMPRESSION TEST SPECIFICATION

This engine has decompression components.
A smooth idle generally indicates good compression.
Low engine compression is rarely a factor in running
condition problems above idle speed.
80 - 120 psi (decompression)
A leakdown test is a more accurate way to check for
engine wear. Even with compression in the acceptable
range, the engine may still have a worn cylinder/rings.
q
. Inspect
MAINTENANCE
NOTE
Cylinder Compression:
Cylinder Leakdown:
Less than 20%
2
2.13