Fuel Tank Installation - Polaris RZR 570 2013 Service Manual

Table of Contents

Advertisement

FUEL SYSTEM
12. Remove the two tank bracket fasteners that retain
the fuel tank in the chassis. Swing the tank brackets
clear of the fuel tank for removal.
13. Lift the rear of the fuel tank up first and carefully pull
it up and out from the vehicle.
4.26

FUEL TANK INSTALLATION

1. Carefully reinstall the fuel tank assembly.
2. Reinstall the two fuel tank brackets and fasteners.
3. Reinstall the three shift lever support bracket
fasteners.
4. Reinstall the rear RH fender well and secure with
fasteners .
5. Reinstall the seat belt mechanism and secure the
lower bolt.
6. Reinstall the RH rocker panel and all previously
removed fasteners.
7. Reinstall the rear seat base / support assembly and
secure with the fasteners.
8. Reinstall the center console and shift knob.
9. Install the fuel line, vent hose and clamp. Verify they
are secure.
10. Reconnect the fuel pump electrical harness.
11. Reconnect the negative battery cable. Test the fuel
pump by turning the ignition key on and listening for
the pump to activate. Check for leaks.
12. Finally, install the rear service panel along with the
seats.
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rzr 570 2014Rzr 570 2015Rzr 570 2016

Table of Contents