Operation Panel; Zoom Buttons; Power Indicator - Canon RE-350 Instruction Manual

Operation Panel

RS232C CONTROL button/indicator
Use this button to switch between online and offline to
a computer. The indicator flashes when the system is
set to online, and stays lit while online.
INPUT SELECT button/indicator
Use this button to select input equipment, when switching
between pictures via the camera head and pictures via external
input equipment (see page 17)
external input equipment is selected.
NEGA button/indicator
Use this button for negative/positive
conversion
lights up when conversion is made.
RS232C INPUT
POWER
CONTROL
SELECT NEGA

POWER indicator

Lights up when the power
is ON (see page 12).
B/W button/indicator
Use this button to project black-
and-white documents
The indicator lights up when the
system is in black-and-white mode.
DETAIL knob
Use this knob to adjust picture quality
the knob to the HARD side to emphasize the outline. Turn
the knob to the SOFT side for softer outline.
. The indicator lights up when
(see page 14). The indicator
WHITE BALANCE
button/indicator/knob
Use this button/knob to adjust color tone
page 14) . To adjust automatically, press the
AUTO WHITE BALANCE button. To adjust
manually, use the WHITE BALANCE knob. Turn
the knob to the RED side to increase red tone.
Turn the knob to the BLUE side to increase blue
tone. The AUTO WHITE BALANCE indicator
flashes initially, then lights up when adjustment is
completed. If adjustment is unsuccessful, the
indicator goes off.
WHITE BALANCE
B/W
DETAIL
AUTO MANUAL
RED BLUE
SOFT HARD
LIGHTS button/indicator
Use this button to turn ON the
illumination lamps for reflection
copies. The indicator flashes
during preheating, and stays lit
(see page15) .
after preheating.
(see page 15) . Turn
EXPOSURE knob
Use this knob to adjust brightness of the image
(see page 15). To increase brightness, turn the
knob to the "+" side. To decrease brightness,
turn the knob to the "-" side.
FOCUS buttons/indicator
Use this button to compensate focus
13) . To compensate automatically, press the
AUTO FOCUS button. To compensate
manually, press the NEAR button or FAR
button. The AUTO FOCUS indicator flashes
initially, then lights up when compensation is
completed. The indicator goes off if
compensation is unsuccessful, or during
manual compensation.
(see
FOCUS
EXPOSURE
MANUAL
AUTO
NEAR
- - +
MEMO The illumination lamps and the backlight cannot be used at
the same time.
(see page

ZOOM buttons

Press the WIDE button to change
the picture to wide angle. Press the
TELE button to change the picture
to telephoto angle. Keep pressing
the WIDE button or TELE button,
the functions will initially work
slowly, then faster.
BACK
LIGHT
LIGHTS
ZOOM
WIDE TELE
FAR
BACK LIGHT button/indicator
Use this button to turn ON the
backlight for transparencies (see page
13). The indicator lights up when the
backlight is used.
E
8