Using External Synchronization - Canon RE-350 Instruction Manual

Using External Synchronization

The following illustration shows an example of connecting a camera for a video conferencing system to the
RE-350. The picture will not flicker when the INPUT SELECT button is pressed to change from video
captured by the camera of the RE-350 to that from external input and vice versa.
External input
Video Conferencing System
Switches for adjusting horizontal phase and hue.
Hue selector
Set the selector according to the hue of
the reference signal so that the image
hue matches the document hue.
Phase
0°
90°
180°
270°
19
VIDEO OUT
VIDEO IN
AUDIO VIDEO S VIDEO
OUT
R L
IN
If the RE-350 is the terminating equipment in your system using multiple external
synchronization input equipment, set this switch to ON.
External synchronization can be used for compositing images from multiple
NOTE
visualizers or video cameras on a single monitor, as well as for color
measurements using a computer. For mobe information, please contact your
dealer.
Swich position
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
MIC LEVEL
Camera of the RE-350
VIDEO IN
EXT
VIDEO OUT
RGB OUT EXIT RS-232C
R G
SYNC
ON 75 OFF
24/96
100/60
ID 0
B
ID 1
ON SYNC OFF
1 0
Hue fine-adjustment volume
Use this volume for fine-adjustment
after changing the hue with the hue
selector.
Horizontal phase adjust volume
Use this volume to align the horizontal
phase when mixing pictures.
Right side panel
1 2 3 4
H
SC
MIC
PHASE
INPUT SELECT button
Rear panel
AC OUTLET
AC INLET