Operation; Starting The Blower - Toro Flex-Force Power System 51822 Operator's Manual

60v max axial blower
Hide thumbs Also See for Flex-Force Power System 51822:
Table of Contents

Advertisement

Operation

WARNING
The blower can throw debris, possibly
causing serious personal injury to you or
bystanders.
• Do not blow hard objects, such as nails or
bolts.
• Do not operate the blower near bystanders
or pets.
• Be careful of blowing direction (i.e.,
blow away from bystanders, windows,
automobiles, etc.). Only use as much
speed as required.
• Use extra care when cleaning debris from
stairs or other tight areas.
• Wear safety goggles or other suitable eye
protection, long pants, and slip-resistant
footwear.

Starting the Blower

1.
Make sure that the vents on the blower are clear
of any dust and debris.
2.
Align the cavity on the battery pack with the
tongue in the handle housing
3.
Grasp the handle and push the battery pack into
the handle until the latch locks into place
3).
1. Battery latch
4.
To start the blower, squeeze the variable-speed
trigger
(Figure
7).
Note:
Engage the speed lock to keep the
machine on without pressing the variable-speed
trigger
(Figure
7).
(Figure
6).
Figure 6
1. Speed lock
2. Turbo boost button
3. Variable-speed trigger
(Figure
g273146
8
Figure 7
4. Battery latch
5. Blower venting areas
g267241

Advertisement

Table of Contents
loading

This manual is also suitable for:

321000001

Table of Contents