Unpack And Set Up - Canon PIXMA Q T 1 0 8 5 1 V 0 1 Getting Started

Unpack and Set Up

1
Check your box contents
MX860
printer/copier/scanner/fax
print head
(sealed package
is packed in the
paper output tray—
open tray to remove
package)
ink tanks
If any parts are missing, contact Canon (see back cover for contact
data).
2
Remove all packing materials
a
Remove all tape from the outside of the MX860.
b
Open the paper output tray.
phone cord
power cord
setup CD
USB cable
NOT SHOWN:
(needed for initial
documentation
network setup
or USB connection)
paper output tray
c
Lift the scanning unit until the support slides into place.
print head holder
d
Remove all tape and packing material from inside the MX860.
e
Lift the scanning unit slightly to release the support and close.
prepare
prepare
scanning unit support
hardware software network
hardware software network
5