Wireless Networks With Multiple Airport Access Points - Canon PIXMA Q T 1 0 8 5 1 V 0 1 Getting Started

wireless network with

Wireless Networks with Multiple Airport Access Points

multiple access points
(example: Airport Extreme and Airport Express)
For example, Airport Extreme and Airport Express or Time Capsule
If your network has only a single access point, go to
page 19.
1
Locate the name and password (if applicable) of your wireless
network
Click the icon in the menu bar and write down the network name
with the checkmark next to it.
2
Make sure the MX860 is ready
Ensure the MX860 is connected to your computer
with the USB cable and is powered on
You will need the USB cable only for the initial network
setup. Once your MX860 is connected to your network, the USB
cable is no longer needed.
Wi-Fi router
Wi-Fi
router
wired network connecting
with an Ethernet cable
The MX860 is set at the factory to connect to a wireless
(Wi-Fi) network. If your MX860 has been previously set for a wired
network, ensure the connection type is set for a wireless network.
Go to "Set the Network Connection Type" on page 28 for details.
3
LAN connection
Select
On the Canon IJ Network Tool dialog, select LAN connection, then
click OK.
router
4
Select printer to use
a Setup in the pop-up menu.
Select
b MX860 series in the Printers pane.
Select
c OK.
Click
prepare hardware software network
prepare
hardware software network
prepare
hardware software network
prepare
hardware software network
23