Canon PIXMA Q T 1 0 8 5 1 V 0 1 Getting Started page 36

Select the Scanner
The Canon IJ Network Scanner Selector dialog opens.
1
Select scanner
a
From the pop-up menu, select
b
In the Network Device List pane, select the MAC address of the
MX860.
There should be only one device listed unless you have
more than one MX860 series device connected to your network.
c
Click Apply to use the MX860 as a scanner.
d
Confirm that a checkmark appears next to the selected device, then
click Exit.
Congratulations! You are finished with the setup.
Go to "Start Using Your MX860!" on page 37.
36
Canon MX860 series Network.