Foxwell T1000 Quick Start Manual page 2

TPMS Sensor Programming
Manual Create
Manual Create
Clone by Activation
Automatic Create (�-�� sensors)
Highlight TPMS from the Select Programming--
main menu and select the Manual Create from the
vehicle model as need. available menu.
Clone by Activation
Manual Create
Clone by Activation
Automatic Create (�-�� sensors)
Highlight TPMS from the Select Programming--
main menu and select the Clone by Activation from
vehicle model as need. the available menu.
Automatic Create (1-16 sensors)
Manual Create
Clone by Activation
Automatic Create (�-�� sensors)
Select Programming--
Highlight TPMS from the
Automatic Create from
main menu and select the
vehicle model as need. the available menu.
012345678
Y
Input the sensor ID in the Place a new Foxwell sensor
dialog box and press Y to near the TPMS tool (around
continue. 0-20 cm).
Y
Place the tool near the
After trigger successfully,
original sensor to be copied
and press Activate to press Y to continue.
continue.
Y
Place new Foxwell Press Y to start the
sensors(1-16) near the programming when the tool
TPMS tool (around 0-20 cm). detect the sensor.
Y
Press Y to start the program-
ming when the tool detect the
sensor.
Y
Place a new Foxwell Press Y to start the
sensor near the TPMS tool programming when the tool
(around 0-20 cm). detect the sensor.
For TPMS Service Tool T1000
Before updating, please ensure you are connected to the Internet and you have created a Foxwell ID.
Connect the scanner to the computer with the TF
card reader or USB cable provided (TF card reader
update is suggested).
s