Table of Contents
Advertisement
Trademarks
FOXWELL is the trademark of Shenzhen Foxwell Technology Co., Ltd.
All other marks are trademarks or registered trademarks of their respective holders.
Copyright Information
©2020 Shenzhen Foxwell Technology Co., Ltd.
All rights reserved.
Disclaimer
The information, specifications and illustrations in this manual are based on the latest information
available at the time of printing.
Foxwell reserves the right to make changes at any time without notice.
Visit our website at
www.foxwelltech.us
For Technical Assistance, send us email at
support@foxwelltech.com
1
T1000 TPMS Service Tool Manual_English_V1.01
Advertisement
Table of Contents
Related Manuals for Foxwell T1000
Summary of Contents for Foxwell T1000
- Page 1 Disclaimer The information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Foxwell reserves the right to make changes at any time without notice. Visit our website at www.foxwelltech.us For Technical Assistance, send us email at support@foxwelltech.com...
-
Page 2: One-Year Limited Warranty
Foxwell. 3 The customer shall bear the cost of shipping the product to Foxwell. And Foxwell shall bear the cost of shipping the product back to the customer after the completion of service under this limited warranty. - Page 3 OF THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF FOXWELL KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. Foxwell SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.
-
Page 4: Safety Information
Do not touch engine components that get very hot when an engine is running to avoid severe ● burns. T1000 TPMS Service Tool Manual_English_V1.01... - Page 5 (for manual transmission). And never leave a running engine unattended. Do not wear jewelry or loose fitting clothing when working on engine. ● Don't connect or disconnect the equipments while the ignition is on or the engine is running. ● T1000 TPMS Service Tool Manual_English_V1.01...
-
Page 6: Table Of Contents
4.3 TPMS Sensor Programming................................18 5 RKE & RF Monitor.............................. 22 6 Latest Test................................23 7 System Setup..............................24 7.1 Language........................................ 24 7.2 Area......................................... 25 7.3 Beeper Set......................................26 7.4 Automatic Power-off Interval................................. 26 7.5 ID Format........................................ 27 T1000 TPMS Service Tool Manual_English_V1.01... - Page 7 7.6 Pressure Unit......................................28 7.7 Temperature Unit....................................29 7.8 Tire Test........................................29 8 About..................................30 9 Update...................................31 9.1 Create a Foxwell ID....................................31 9.2 Register Your Scanner..................................36 9.3 Update the Scanner....................................38 T1000 TPMS Service Tool Manual_English_V1.01...
-
Page 8: Using This Manual
IMPORTANT indicates a situation which, if not avoided, may result in damage to the test equipment or vehicle. Example: IMPORTANT Do not soak keypad as water might find its way into the TPMS Service Tool. T1000 TPMS Service Tool Manual_English_V1.01... -
Page 9: Introduction
2.2 About T1000 The T1000 is the latest TPMS diagnosis and service tool developed by Foxwell.It accurately activates and decodes TPM sensors and displays the data or any faults.And It can do programming for Foxwell sensors. -
Page 10: Descriptions
2 USB Cable - provides connection between the TPMS Service Tool and a computer to upgrade the tool and charges the built-in battery. 3 Magnet - triggers early TPMS sensors which need a magnet to activate. T1000 TPMS Service Tool Manual_English_V1.01... -
Page 11: Technical Specifications
1. Press the power switch to power on the tool, and the unit will display the Main Menu. 2. Hold the power switch for one 1 seconds and the release to power down the T1000. The tool powers down automatically after a period of inactivity. Please refer to 7.4 Auto Power-off Interval for details. -
Page 12: Application Overview
This section provides a brief introduction of symbols and icons of tool display. Indicator Description Indicates internal battery volume. Indicates the TPMS tool is sending signals to the tire sensor for activation and test. Indicates battery charging. T1000 TPMS Service Tool Manual_English_V1.01... -
Page 13: Tpms
4 TPMS The T1000 is designed to activate and program all know TPM sensors and decode data including sensor ID,tire pressure, temperature, battery condition, and OE part number, and to warn of a wrong sensor installed, missing or faulty sensor, duplicate ID, and incorrect sensor mode. -
Page 14: Activation In All Wheel Mode
1. In all wheel mode, the solid spot flashes at the wheel to be tested. Depending on the sensor type, place the tool to the correct position to insure sensor activation and decode. Below is a chart illustrating how to correctly place the tool. T1000 TPMS Service Tool Manual_English_V1.01... - Page 15 3. TPM data is stored and can be accessed by selecting a wheel location and press the YES key. 4. Depending on test results, one of the following possible scenarios may display. Sensor Type Illustration Description T1000 TPMS Service Tool Manual_English_V1.01...
-
Page 16: Activation In Single Wheel Mode
TPMS sensor was successfully activated and Successful decoded. The T1000 emits a series of tones Sensor Read and displays pressure at wheel location. The search period expires without reading a TPM. The T1000 emits a single audible beep Failed Sensor Read and displays “No sensor detected.”... -
Page 17: Sensor Learning Process
2. On each screen that appears, select the correct option and then press the YES key. Do this until the complete vehicle information is entered. 3. Scroll with the UP/DOWN arrow keys to highlight Sensor Learning Process and press the YES key to confirm. T1000 TPMS Service Tool Manual_English_V1.01... -
Page 18: Tpms Sensor Programming
Figure 4-10 Sample Sensor Learning Process Screen 4.3 TPMS Sensor Programming The TPMS Programming function lets users to program the sensor data to the Foxwell sensors and replace faulty sensor. There are following four options available when doing programming. Manual Create ●... - Page 19 Figure 4-12 Sample Manual Create Screen 4. Place a new Foxwell sensor near the TPMS tool (around 0-20 cm). Figure 4-13 Sample Manual Create Screen 5. Press Y to start the programming when the tool detect the sensor. 6. Press N to exit after the programming successfully.
- Page 20 4. After trigger successfully, press Y to continue. Figure 4-15 Sample Activation Screen 5. Place a new Foxwell sensor near the TPMS tool (around 0-20 cm). Figure 4-16 Sample Activation Screen 6. Press Y to start the programming when the tool detect the sensor.
- Page 21 The Automatic Create function is to program Foxwell sensors by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID. To create sensor ID automatically: 1. Highlight TPMS from the Main Menu and select the vehicle model as need.
-
Page 22: Rke & Rf Monitor
5 RKE & RF Monitor This section illustrates how to check RF Remote Keyless Entry (key FOB) with the tool. The T1000 tests 315MHz and 433MHz key fobs only, and checks only for a signal present. To test the check RF Remote Keyless Entry: 1. -
Page 23: Latest Test
2. Scroll with the UP/DOWN arrow keys to highlight TPMS Sensor Activate and press the YES key to start. A message asking if the old recording to be cleared displays. Figure 6-2 Sample TPMS Sensor Activate Screen T1000 TPMS Service Tool Manual_English_V1.01... -
Page 24: System Setup
Selecting Language opens a screen that allows you to choose system language. The TPMS Service Tool is set to display English menus by default. To configure system language 1. Scroll with the UP/DOWN arrow keys to highlight Language from Setup menu and press the YES key. T1000 TPMS Service Tool Manual_English_V1.01... -
Page 25: Area
1. Scroll with the UP/DOWN arrow keys to highlight Area from Settings menu and press the YES key. 2. Highlight the area you work in before starting the test. And the tool will load the new database for the selected area. Figure 7-3 Sample Area Selection Screen T1000 TPMS Service Tool Manual_English_V1.01... -
Page 26: Beeper Set
20 minutes and the minimal is 1 minute. To change auto power off interval: 1. Use the UP/DOWN arrow key to select Auto Power-Off from Setup screen and press the YES key to confirm. T1000 TPMS Service Tool Manual_English_V1.01... -
Page 27: Id Format
1. Scroll with the arrow key to highlight ID Format from Setup menu and press the YES key. Figure 7-8 Sample ID Format Setup Screen 2. Press the UP/DOWN arrow key select a format and press the YES key to save and return. T1000 TPMS Service Tool Manual_English_V1.01... -
Page 28: Pressure Unit
YES key. Figure 7-10 Sample Pressure Unit Setup Screen 2. Press the UP/DOWN arrow key select an item and press the YES key to save and return. Figure 7-11 Sample Pressure Unit Selection Screen T1000 TPMS Service Tool Manual_English_V1.01... -
Page 29: Temperature Unit
Selecting Wheels to Test option opens a screen that allows you to select one wheel or all wheels to test. To configure wheels to test 1. Scroll with the UP/DOWN arrow keys to highlight Tire Test from Setup menu and press the YES key. T1000 TPMS Service Tool Manual_English_V1.01... -
Page 30: About
1. Scroll with the UP/DOWN arrow keys to highlight About of the main menu and press the YES key. Figure 8-1 Sample Main Menu 2.A screen with detailed information of the TPMS Service Tool displays. T1000 TPMS Service Tool Manual_English_V1.01... -
Page 31: Update
9.1 Create a Foxwell ID 9.1.1 Register through Website If you are new to FOXWELL, please register on www.foxwelltech.us and create a FOXWELL ID first. If you have installed the update application FoxAssist, please refer to the registration guide on 9.1.2. - Page 32 Please always remember your FOXWELL ID and Password as it’s important for you to manager your product and updates. 4. The registration page will be bypassed, skipping to the log in page. Just input your FOXWELL ID and Password to sign in.
- Page 33 Figure 9-7 Sample Password Reset Succeeded Screen 8. If you forget your email or Foxwell ID, just click Sign in at the top right of the website, then click Forgot password, and click Forget Email or Foxwell ID. You are required to input your registered serial number.
- Page 34 Figure 9-9 Sample FOXWELL Search Result Screen 9.1.2 Register with FoxAssist for T1000 You are also allowed to register and create a Foxwell ID with the update client FoxAssist for T1000. To register through website: 1. Visit our site www.foxwelltech.us and go the Product page. Find your product model and click it to view the product profile.
- Page 35 5. A Registered account is successful message will appear if you registered successfully. Figure 9-13 Sample Registration Success Screen 6. Click OK. It skips to the login page automatically. You can input your FOXWELL ID and Password to sign in.
-
Page 36: Register Your Scanner
To register a scanner , you can either register on www.foxwelltech.us or by the update PC application FoxAssist for T1000. 9.2.1 Register Through Website 1. Open www.foxwelltech.us main page and click Sign in. Input your FOXWELL ID/registered email and password. Figure 9-15 Sample Sign in Screen 2. - Page 37 Warranty Card. 9.2.2 Register With FoxAssist for T1000 To register with FoxAssist: 1. Launch the PC application FoxAssist for T1000. Sign in with your Foxwell ID/ registered email and password. Figure 9-18 Sample Sign in Screen 2. Select Activate and input serial number to complete product registration. If you have multiple scanners to be registered, please enter all serial numbers you wish to activate.
-
Page 38: Update The Scanner
Internet Explorer 4.0 or newer ● NOTE Before updating, please make sure your network works correctly. Before updating, please make sure you have already created a Foxwell ID. To update your scanner: 1. Double click the desktop icon to launch the application. - Page 39 Figure 9-20 Sample Sign in FoxAssist for T1000 Screen 4. You are lead to Download tap after you sign in, please choose the Update icon and press the Enter Key on the scanner, then all updates applicable to your scanner display.
Need help?
Do you have a question about the T1000 and is the answer not in the manual?
Questions and answers