Booster; Activating The Booster; Activating Twinbooster To Level 1; Activating Twinbooster To Level 2 - Miele HR 1622-3 i Operating Instructions Manual

Booster

The burners are equipped with a one-
level Booster function or two-level
TwinBooster (see "Guide to the range –
Induction cooktop").
When the Booster function is activated,
the power is boosted so that large
quantities can be heated up quickly,
e.g., when boiling water for cooking
pasta. The boost in power is active for a
maximum of 15 minutes.
The Booster function can only be used
on two burners at the same time. When
the Booster time has elapsed, the
burner will revert automatically to the
highest power setting.
The burners are connected in pairs in
order to provide sufficient power for the
Booster.
While the Booster function is in
operation, some of the power is taken
away from the linked burner. This has
one of the following effects:
- Auto heat-up is deactivated.
- The power level is reduced.
- The linked burner will be turned off.

Activating the Booster

 Turn the burner control knob
clockwise gently past the point of
resistance to B and back again as far
as it will go.
 appears in the burner display.
Operating the induction cooktop

Activating TwinBooster to level 1

 Turn the burner control knob
clockwise gently past the point of
resistance to B I/II and back again as
far as it will go.
 appears in the burner display.

Activating TwinBooster to level 2

 Turn the burner control knob
clockwise gently past the point of
resistance to B I/II and back again as
far as it will go.
 Turn the burner control knob again
gently past the point of resistance to
B I/II and back again as far as it will
go.
 appears in the burner display.

Deactivating Booster/TwinBooster

 Select a different power level.
The Booster symbol goes out.
49