At The End Of The Self Clean Program - Miele HR 1421-3 E Operating Instructions Manual

Starting Self Clean at a later time
Start the Self Clean program as
described and then set the desired
finish time within the first five minutes of
starting the program.
 Select OK.
 Use  or  to move the triangle 
until it is under .
 appears.
 Confirm with OK.
The finish time, calculated from the
current time of day plus the duration of
the Self Clean program selected, will
appear in the display.
 Use  or  to set the finish time you
want.
 Confirm with OK.
The finish time set is now saved.
The oven heating switches off.
The end time can be changed at any
time up to the start of the program.
As soon as the start time has been
reached, the oven heating and the
cooling fan will switch on and the
duration will appear in the display.
Cleaning and care of the oven

At the end of the Self Clean program

First ,  and  appear.
A continuously lit  symbol indicates
that the door is still locked. When 
flashes, the door is unlocked.
When the door lock is released:
-  goes out.
-  will flash.
- The buzzer will sound briefly if
activated.
 Turn the operating mode selector to
the Off position.
The audible signal will stop and the
symbols on the display will go out.

Risk of injury due to hot surfaces
At the end of the Self Clean program,
the oven will still be very hot. You
could burn yourself on the heater
elements and the oven
compartment.
Allow the heater elements and the
oven compartment to cool down
before removing any Self Clean
residues.
 Clean the oven compartment to
remove any Self Clean residues (e.g.
ash) that can build up depending on
the degree of soiling in the oven
compartment.

  
 
h
71