Skipping Unwanted Channels; Fine Tuning Channel Reception - Samsung SyncMaster 211MP Owner's Instructions Manual

rubens_monitor_eng 1/28/03 8:40 PM

Skipping Unwanted Channels

Channel
¨
Auto store
¨
Manual store
¨
Name
¨
Add/Erase
¨
Fine tune
¨
Channel sort
Channel
P 1 Added
P 2 Added
P 3 Added
P 4 Added
Channel
P 1 Erased
P 2 Added
P 3 Added
P 4 Added

Fine Tuning Channel Reception

Channel
¨
Auto store
¨
Manual store
¨
Name
¨
Add/Erase
¨
Fine tune
¨
Channel sort
Fine tune
English-20
Page 20
All manuals and user guides at all-guides.com
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
SOURCE
Power
during scanning.
SOURCE
1
Press the MENU button.
Power Result:
P.STD
2
Press the P or P button to select the Channel.
SOURCE AUTO
Result:
3
Press the
P.STD
4
Press the P or P button to select the Add/Erase. Press the
- or
Result:
5
Press the P or P button to select the channel to add or erase.
If necessary, select the Added or Erased by pressing the
MUTE
+ button.
6
Repeat Step
MUTE
-/--
TTX/MIX
If the reception is clear, you do not have to fine-tune the channel,
TTX/MIX
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to fine-tune
SOURCE
-/--
HOLD
the channel manually.
Power
TTX/MIX
SLEEP
1
Press the MENU button.
SOURCE
Result:
HOLD DUAL I/II LIST/FLOF CANCEL
P.SIZE
2
Press the P or P button to select the Channel.
P.STD
SLEEP SUBPAGE
Result:
7
3
Press the
P.SIZE PBP
4
Press the P or P button to select the Fine tune.
5
Obtain a sharp and clear picture and good sound quality by pressing
the
MUTE
TTX/MIX
-/--
Power Power
SOURCE AUTO DISPLAY AUTO DISPLAY STILL
P.STD P.STD S.STD
AUTO DISPLAY STILL
The main menu is displayed.
S.STD
DISPLAY STILL
The options available in the Channel group are displayed.
- or + button.
S.STD
+ button.
The stored channels are displayed.
MUTE MUTE EXIT
EXIT
5
for each channel to be added or erased.
EXIT
-/-- -/-- PRE-CH
PRE-CH
TTX/MIX V.DOLBY
Power Power
HOLD DUAL I/II LIST/FLOF CANCEL HOLD DUAL I/II LIST/FLOF CANCEL
V.DOLBY
SOURCE AUTO DISPLAY AUTO DISPLAY STILL
PRE-CH
SLEEP SUBPAGE SLEEP SUBPAGE SIZE SIZE PIP
DUAL I/II LIST/FLOF CANCEL
ON
Power
P.STD P.STD S.STD
P.SIZE P.SIZE PBP PBP LOCATE
V.DOLBY
SUBPAGE SIZE PIP
ON
SOURCE AUTO DISPLAY AUTO DISPLAY STILL STILL
The main menu is displayed.
PBP LOCATE
P.STD S.STD S.STD
SIZE PIP
The options available in the Channel group are displayed.
ON
- or + button.
LOCATE
- or + button.
MUTE MUTE EXIT
MUTE EXIT EXIT
-/-- -/-- PRE-CH
TTX/MIX V.DOLBY
-/-- PRE-CH PRE-CH
Power
STILL
SOURCE AUTO
S.STD
Power
P.STD
SOURCE AUTO DISPLAY
P.STD
EXIT
MUTE
- or
MUTE
PRE-CH
-/--
V.DOLBY
TTX/MIX
-/--
HOLD DUAL I/II LIST/FLOF CAN
STILL
PIP
ON
TTX/MIX
SLEEP SUBPAGE
S.STD
LOCATE
HOLD DUAL I/II LIST/FLOF CANCEL
P.SIZE PBP
SLEEP SUBPAGE SIZE
P.SIZE PBP
EXIT
PRE-CH
V.DOLBY
DISPLAY ST
S.S
STILL
S.STD
EX
EXIT
PRE
V.DO
PRE-CH
V.DOLBY
SIZE P
O
LOC
PIP
ON
LOCATE