Menu Item 5: Aux In Volum; Menu Item 6: Aux Out Volum; Menu Item 7: Rclk Tune; Menu Item 8: Band Stacking Mode - XIEGU G90 Operation Manual

Menu Item 6: AUX OUT Volum

Func�on: Set the level (volume) of ACC port output audio signal
Adjustable range: 0~15
Default: 15

Menu Item 7: RCLK Tune

Func�on: Adjust the reference clock of the internal frequency synthesizer. (To
correct the frequency accuracy of the radio).
Adjustable range: -1000Hz~+1000Hz
Default: 0Hz
i.e.: If you are showing a consistent offset of 20Hz when you are talking to
sta�ons, you can adjust the reference frequency by 20Hz to re-calibrate.
If you are 20Hz low on your frequency display, set the adjustment to be + 20Hz.

Menu Item 8: Band Stacking Mode

Func�on:
Set band stacking mode. When switching through bands, using the
band bu�ons on the top of the radio or the arrow keys on the
microphone, you can include or exclude the shortwave broadcast
bands in the rota�on.
This ONLY affects quick switching between bands – the SW broadcast
bands remain receive-only. You can only transmit on the Ham bands
with this radio.
Op�ons: HAM Band
FULL Band
Default: HAM Band

Menu Item 9: ON/OFF Beep

Func�on: Enable/disable and the system beep at startup & shutdown.
Op�ons: Enable/Disable
Default: Enabled

Menu Item 10: Version

Func�on: Display the firmware version of the head and body. e.g.
APP: V1.XX
BASE: V1.XX
VISIT RADIODDITY.COM FOR DOWNLOADS AND HELP
Only display amateur bands
Display all frequency bands
Head firmware version No.
Body firmware version No.
The large the value, the greater the volume
41