What Happens When Fax/Tel Mode Is Selected - Canon B155 User Manual

What happens when Fax/Tel Mode is selected

Type of call
Tel. charges begin for caller.
RING START TIME
(Factory setting = 8 sec.)
F/T RING TIME
(Factory setting = 22 sec.)
To select Fax/Tel Mode
Press [Receive Mode] until Fax/Tel Mode appears in the LCD.
1
To change the Fax/Tel Mode settings:
Press [Function].
1
Press [ ] until RX SETTINGS is displayed in the LCD. Press [Start/Copy].
2
Press [ ] until FAX/TEL SWITCH is displayed in the LCD. Press [Start/Copy].
3
The LCD displays RING START TIME. Press [Start/Copy]. Choose between 0 and 30 SECONDS
4
using the numeric buttons, then press [Start/Copy] again.
The LCD displays F/T RING TIME. Press [Start/Copy]. Choose between 10 and 300 SECONDS
5
using the numeric buttons, then press [Start/Copy] again.
The LCD displays F/T SW ACTION. Press [Start/Copy]. Press [
6
or DISCONNECT. Press [Start/Copy].
Press [Stop] to finish registration and return to the standby mode.
7
120
Appendix
Telephone
Sending document
Fax answers without ringing
Fax listens for FAX TONE (For 8 sec.)
FAX TONE is not detected
Fax starts ringing
If you do not pick up the telephone within
22 seconds
F/T SW ACTION
Choose between: Receive and Disconnect
(Factory setting)
RECEIVE
Not all fax machines are capable of sending a FAX
TONE. For those cases if you set the F/T SW
ACTION to RECEIVE, the fax switches to receive
mode automatically and starts receiving the
document. If no document comes in it disconnects.
Fax Fax
Sending document
manually automatically
FAX TONE
Document received
detected
automatically.
(FAX TONE is detected
and fax switches to
receive mode.)
Pick up the telephone
DISCONNECT
(Factory setting)
Fax disconnects the
call.
] or [
to talk.
] to choose RECEIVE