Operating Environment
Supported Camera Servers
The table below lists the Camera Servers that are supported by VK-64/VK-16.
This information is correct as of January 2007. For the latest information, please
refer to our WebView Product web page:canon.com/webview
Camera Server
VB-C300
VB-C50i
VB-C50FSi
VB-C50FSi
VB-C10
VB150
VB101
Note
Firmware Upgrade
The latest information concerning firmware can be found on the following Canon Web site:
canon.com/webview
22
VB-C50iR
VB-C10R
If using a VB101, you can make use of a single camera
connected with VK-64/VK-16 at a time.
If using a VB150 with multiple cameras, there are restrictions
on frame rate.
If using the Simultaneous mode with the VB150, upgrade the
firmware to Version 1.1 Rev.39 or later.
Firmware Versions
Ver. 1.0
Ver. 1.1 Rev. 33 or later
Ver. 1.2 Rev. 76 or later
Ver. 1.0 Rev. 68 or later
Ver. 1.0 Rev. 68 or later
Ver. 1.0 Rev. 26 or later
Ver. 1.1 Rev. 39 or later
Ver. 3.0 Rev. 69 or later