Canon VK-64 Administrator's Manual page 124

Setting Motion Detection Recording
●
Step 6: Set the External Outputs
Note
Click OK to save the new settings and close the dialog.
Click Cancel to discard the new settings.
Note
Tip
124
Available external outputs depend on the Camera Server.
If the Picture Recording feature of a Camera Server is used
and its configuration includes a preset position then this
preset position will override camera positions set by VK-
64/VK-16, including those in recording schedules and the
Viewing Screen. If VK-64/VK-16 has camera control, this will
be lost when the Camera Server is setting a new preset
position.
If the before event and after event fields are set to 0 seconds,
video will still be recorded while motion is detected.
Refer to the Chapter 6 for optimizing the Motion Detection
operation.
Click the drop-down menu for the
target external device and set On or
Not specified.