Samsung MIM-E03CN Installation And Maintenance Manual page 15

Heating & Hot Water Installation
Field settings for Hot Water
11. Then v to 30** DHW, press ok, 3011 will be highlit Domestic hot water tank , press OK
12. Press v, to hysteresis thermo off, press ok
13. Go to 302* heat pump, press ok, press v 5 times to 3025 Max DHW operating time, press ok
14. Use ^ and v to set to 60 mins for 200 litre or 90 mins for 300 Litre cylinders, press ok
15. Press v to 303* booster heater, press ok.
16. Press v to 3032 delay time, press ok, use ^ and v to set to 30 mins, press ok then return
17. Press v to 304* disinfection, press ok
18. Press v to 3042 interval, press ok, press ^ or v to get to Tue, press ok
19. Press v to 3043 start time, press ok, use ^ and v to set to 3am, press ok.
20. Press v to 3044 target temp, press ok, use ^ and v to set to 60°C, press ok
21. Press v to 3045 duration, press ok, use ^ and v to set to 10 mins, press ok.
22. Press return nine times to return to the normal screen
The cylinder maintains the tank within 5°C of set point. It heats the cylinder for the max time adjusted in line 14. To begin with it uses just
the heat pump, but after the time set in line 16 the immersion comes in to help.
Cylinder Timer, if you are heating a hot water cylinder
To avoid the cylinder heating being switched off accidentally we normally add 2 on timers a day, one
at 3-00 am and one at 15-00 pm. This stops nuisance tripping, resets the unit after power cuts and
insures the cylinder is hot 24 hours a day. We don't normally set any off times.
To set the cylinder up as above:
1. From the front screen press the gear button, scroll right > to schedule, press ok.
2. If any timers are showing highlight them and select delete. When no timers are shown we can
add some new ones.
3. Highlight + add schedule, press ok
4. Highlight daily schedule, press ok
5. Type - quiet will show, press v to DHW, do not use quiet
6. Press > press ^ to set to Standard, press >, adjust hour to 3, am press ok
7. Scroll up ^ to + add a timer
8. Highlight + add schedule, press ok
9. Highlight daily schedule, press ok
10. Type quiet will show, press v to DHW, do not use quiet
11. Press > press ^ to set to Standard, press >, adjust hour to 3, pm press ok