Samsung MIM-E03CN Installation And Maintenance Manual page 14

Setting up the controller and the time.
1. Press the gear button, bottom right. Press v, then > option,
press OK
2. User Mode, press OK
3. Wired remote controller, press ok
4. LED > to on
5. Button Mute > on
6. Current time >
7. Date > OK
8. Adjust day with ^ and v, press > adjust the Month with ^
and v, press > adjust Year adjust with ^ and v press, ok.
9. Go to Time
10. Adjust hour with ^ and v, press > adjust the mins with ^ and
v, press ok.
11. To get back to the normal screen press return 5 times
The cylinder timer and field settings will already be set up for you.
Field settings for heating
1. Press ok to wake the controller up.
2. Press ^ and v together for 6 seconds, password shows you need to set 0202 by pressing.
3. Press >, then ^ twice, > twice, ^ twice then press OK
4. Press v 8 times to Field setting Value, press >
5. 10** will show press v to 20**Water law press >
6. 201* will show Outdoor temp
7. Set low to 15 and set high to -2 (-5°C in Scotland) using ^ and v press ok
8. Go to 202* water out, press ok
9. Set low to 37 and set high to 50 for radiators and 45 for underfloor heating using ^ and v press ok
10. Press v nine times to 2091, press ok, press v to use Signal on off WL interlink Off water pump 3, press ok, press return.
You have now set up the weather compensation. The water in the rads UFH will be warmer in cold weather and cooler in warm weather.
Installation Manual rework.indd 18
Heating & Hot Water Installation